If you have already done the basic configuration, we will show you how to make the network settings in the following.
To do this, download the "Airport Utility" from the App Store. After you have successfully installed the Airport Utility, you will see the available airports in your environment.
Now touch the desired airport (in this example GASTROFIX AIRPORT EXTREME) and click in the following window on "Edit".
Now you can configure the network settings for this airport by selecting "Advanced" in the following window.
Select the option "DHCP and NAT" and set the router mode from "Off (Bridge Mode)" to "DHCP and NAT".
After you have made the setting, select "DHCP and NAT" to make the required settings.
Follow these steps:
- DHCP - Range : Choose 192.168
- Start of Range: 192.168.7.200
- End of Range : 192.168.7.254
Your settings should now look like the example above. Now click on "Done" and "Update" the settings.
The airport will now restart itself. If the airport is available again, click on it and select the "Back" marked with 1 and choose Ignore problem in the "Double-NAT" message.
The configuration is now complete and you can integrate your hardware.